Upgraded to Diode Dynamics SLF LED Fog Lights

The guys at Diode Dynamics are awesome - not only do they have great products, they stand behind them!  We recently had one of our older LED bulbs die out, so we did an RMA and since they no longer produced those lights, they sent us the latest SLF model LED - and wow are they great!

 

 

here's one of the new LEDs - excellent packaging and plugs right into the fog light socket!

Here's the simple removal/install process... I used to think you had to pull the bumper off these cars, but if you carefully use a flat screwdriver - it pops the fog light fascia off the bumper and all you need is a Torx-30 screwdriver to remove 3 screws!

 

Old LED on top, new setup on the bottom - very slick setup!

the trick to the front section coming off was to put a thin screwdriver in between the bumper and the fascia section for the foglight, you have to check a few locations but once you press down and pop the clips, pull toward the front of the car and it will pop out.

carefully popping off the fascia exposes the lens and 3 screws

3 simple screws and the lens comes right out 

just unplug the old bulb, and add the new LED - and screw/snap it all back together

Light output is excellent and now we have fogs again!  Highly recommended!