Headlight upgrades across the board - worth it!

After my last post, and a few weeks of driving, while I liked the LEDs they just didn't have a long-term benefit that I was hoping for.  I opted to return them and went for an insane update.  With all the rain in NorCal, the nights have felt darker than usual, maybe it's just my old eyes 😆

Here's the upgrade list that I used to update ALL bulbs in the headlight, believe it or not there are 4 modifiable light sources in there.  

Left to Right: Amber Turn Signal, Green Turning Light,
Red Headlight, Amber Marker Light

PSA: the links are through Amazon, helps me pay for blogging, hosting, etc.  Please turn off your adblock to see the parts that are used.

Auxito seems to have the best list of all lights that can be upgraded, I did a mix of lights, some due to cost, but it's a great list!  
I'll breakdown the replacements, and let's start with the easy ones - the side marker lights!
These are a pretty common 194 LED replacement.  The implementation in the headlight is interesting as the bulb holder aligns with contacts in the actual headlamp, so you can just swap bulbs and snap the holder back in place.

this squigly thing is the side marker bulb holder

you can see the 194 bulb and the contacts on the holder

quick comparison of 194 vs LED size

swapped in the LED

standard incandescent bulb

new LED bulb, much brighter!

Next up, let's go for broke with the Headlights.  Yes these are expensive, but the OSRAM XENARC Night Breaker Laser D3S LEDs are insanely bright! 

very pricey, but extremely bright HIDs from OSRAM

crazy bright, even at dusk!

up next - the PSX24W bulb is really deep in there!

The next light was the most challenging of the bunch, the turning/directional lights are a size I've never worked with previously.  This makes it part of the challenge.  The PSX24W LED socket has two tabs that you push in and the socket is removed.  The big problem with the headlights is that you cannot get your hands in there, at least I couldn't fit my hands.  I opted to use some curved pliers for a while, but ended up snaping off the tabs which let me remove the socket - at least I could swap the bulbs now!

check out that bulb compared to the LED - HUGE difference!

Lastly, let's swap out the turn signal bulbs.  These are sometimes touchy due to a fast flash issue where resistors may be needed.  In this case, I bought the AUXITO CANBUS anti-flash LEDs, and they work perfectly!  On initial startup they'll fast flash for about 3-5 blinks, but then settle in to a regular flash time sequence.

All in, it's not a cheap upgrade at around $225, but dang the light output is PHENOMENAL!!! and still cheaper than aftermarket headlights.  Two big thumbs up!

Upgraded to LED headlights

One of the HID bulbs I used back in 2019 burned out, so with newer LED technology I upgraded to a new set of D3S LEDs.  OPP ULITE D3S Led Headlight Bulbs, 3RD-Gen 100% Plug & Play, Canbus Error Free, 6000K White 70W 8600LM Headlights Bulb, Replace OEM Xenon Bulb

The process to remove the headlights is really simple, 2 screws with I believe T-25 bits.  Then tug on the housing and it comes forward.  

You can see the old HID bulb on the right, and the replacement LED on the left

Remove the collar from the HID and position it correctly on the new LED bulb

Just align the square hole with the square spot on the LED and it slides right in place

Plug the LED into the HID harness

Simply tuck the extra wire/connector inside the headlight

The results are pretty awesome!  The 6000k offers a blue-white light and these are much brighter than the HID setup!

Highly recommended!!!

Replacing the D3S HID bulbs in the Ford Focus ST

One of our ST's headlights went out last week, huge difference in light output when one of your HIDs goes out...  So I was on the hunt for a good D3S (the size) replacement...

The stock HID ballast in the ST3 are Osram 35W, so that's already good (as compared to older 25W versions)  There are the usual HID replacement parts, and boy can they be expensive!

One of the top rated bulbs is the OSRAM XENARC Night Breaker Laser D3S rated at 4600K

  

But holy smokes, $170+ for a pair of bulbs!  Surely there must be something better!  I was determined to find a GOOD set of HID for cheaper, and has great light output!

I found the RCP - D3S6 - (A Pair) D3S/ D3R 6000K Xenon HID Replacement Bulb Diamond White Metal Stents Base 12V Car Headlight Lamps Head Lights 35W for a whopping $27

If you know the HID Kelvin color chart, 4.6K from the Osram is a decent HID coloring (as shown below) to see well, if you go too low you're yellow (good for fog lights), and if you go too high - well, you turn into ricer purple, heck I've even seen some guys go to 30,000K and it's HULK green!

Here's the replacement process I used... took me about 20 minutes to do both sides:

    

only 2 screws need to be removed, arrows below

once the screws are out, gently rock the headlight around - you'll know when it comes free - just don't forget to pull the plug that connects to the light - there's a small clip underneath, the tab slides away from the headlight and the clip should pull right out - on the bottom of the headlight you'll see the HID igniter (note the 35W)

pull the rubber cover off the back of the headlight where the HID is located, pretty easy two little tabs available - just give them a tug...  then you'll see the internals where the bulb is connected

I used a flat screwdriver to gently pop off the plug - note the orientation of the bulb

To remove the bulb, there's a twist-lock tab between the bulb and the headlight socket - twist it counter-clockwise (only about a 1/2 in. is all that's needed) and the bulb comes out EASILY.

Here's the OEM HID bulb with the twist-lock collar attached, has a blue igniter - it's an OSRAM XENARC D3S HID Xenon Headlight bulb 66340 - 4.3K color - actually a pretty nice OEM bulb!  About $48/side.

 

NOTE: DO NOT TOUCH THE NEW BULB WITH YOUR HANDS, USE GLOVES!

You have to remove that black twist-lock connector - it's just pressure fit and slides off with a little wiggling.  Note the orientation of the collar as it can fit on the new bulb in a few different angles.  If you can see in the photo above, the open left side of the collar aligns with the plug on the HID bulb.

Below, you can seee the new RCP D3S6 D3S/ D3R 6000K Xenon HID Replacement Bulb has a white ignitor and I've attached the collar.

 

Here's the new bulb installed - just reverse the process and you're done!

Definitely a whiter light than OEM (6K vs 4.3K)

I'll have to do some night pics but so far these lights have not dissapointed at all for only $13 per bulb!  Enjoy!